Marble & Granite Polish Paste 1Kg - Polish & Shine for Marble Granite

 Marble, Terrazzo, and Granite Polishing Powder and Shine Agent

APPLICATION: Marble, including hard marble (green marble, black marble), granite, terrazzo, limestone, etc.

COVERAGE: 300 gr for 12 - 16 m2 (depending on the surface's wear level).

FEATURES: 

✅ Powder particles are much finer

✅ Non-corrosive to marble or skin, unlike yellow types which, if left too long on marble or granite surfaces, can damage the marble layer and cause skin corrosion

✅ Mixes evenly to form a unified cream when mixed with water, unlike other products that separate the water and powder again after a short time.

✅ Smooth surface and safer to use, especially if the user cleans for too long or there is residual powder.

✅ Does not contain/is not acidic at all

HOW TO USE: Clean the surface from dust, stains, oil, grease, sealant & wax by diluting 1:5-10 PRIME FLOOR (Marble & Granite Cleaner) concentrate in warm water.

HOW TO POLISH: 

1. Mix the POWDER with water in a bucket & stir into a PASTE or the POWDER can be spread directly manually, then wet with water & stir until it becomes a PASTE.

2. Start rubbing gently (MACHINE: low RPM / MANUAL: cotton cloth), with side-to-side movements until the surface is dry & shiny.

3. Check the results. Repeat steps 1 - 2 if necessary, until the desired polish is achieved.

4. Remove remaining PASTE with a squeegee & add POWDER then repeat process No. 1 - 3 for other areas, until all surfaces achieve the desired shine.

5. Clean the surface & grout joints with clean water. If the surface is difficult to clean, dilute 1:10-20 PRIME FLOOR then clean.

6. Wipe dry with a clean and dry pad.

⚠️ Product is in POWDER form, CAN BE SHIPPED throughout INDONESIA

Available in TUBE form, a ready-to-use CREAM type that doesn't need to be mixed with water, for both manual and machine polishing applications.

AVAILABLE PACKAGING: 

300gr / 1kg 

KEMENKES RI PKD 

📌 WE SERVE BULK ORDERS/B2B (COMPANIES)