Turbo Carb 500mL - Fast and Powerful Carburetor Cleaner

PRIMO Turbo Carb - Fast and Powerful Carburetor Cleaner



For automatic chokes, linkages, throats, PVC valves, intake valves & combustion chambers, as well as engine surfaces, spare parts, and for use during engine overhaul to clean dirt, grease, gum, varnish, and carbon. Improves engine performance & acceleration, reduces fuel consumption and exhaust emissions.



INSTRUCTIONS FOR USE:

1. Carburetor & linkage: With the engine off, remove the air filter & spray all exterior surfaces of the carburetor, including the linkage rod & choke. Let stand for about 1 minute, then spray again to rinse away all dirt, grease & deposits.
   
   

2. Automatic choke: With the engine off, spray both ends of the choke valve while opening & closing it by hand. Spray the vacuum cylinder to remove dirt & gum.
   
   

3. PCV valve: With the engine off, remove the PCV valve from the crankcase, insert the tip of the aerosol spray into the open end of the valve & spray while moving the valve. Start the engine & spray again to thoroughly rinse away all dirt.
   
   

4. Carburetor throat & throttle plate: With the engine running, spray the entire inside of the carburetor throat to remove deposits/dirt adhering to the throttle plate area & other parts. It is recommended to perform cleaning in an open area with good ventilation. Avoid contact with painted surfaces, rubber, plastic, car body. If contact occurs, immediately wipe with a clean & dry cloth.