Rust Buster 1L - Rust & Concrete Remover

Primo Rust Buster Rust & Concrete Remover



✅ The safest cleaner for steel & iron, aluminum, zinc

✅ Ready to use, can be used directly without mixing with water

✅ No re-rusting

✅ Easy to use: dip, brush or spray

✅ No pungent odor

✅ Does not contain HCL

✅ Will not damage metal surfaces

✅ Contains corrosion inhibitors


How to use on rusty metal:
1. Clean dust with a soft wire brush.
2. RUST BUSTER can be applied by: dipping, brushing or spraying.
3. Let the liquid sit for about 10-15 minutes, depending on the severity of rust on the surface. Use a brush if necessary.
4. Rinse with warm water after cleaning. Repeat the process if necessary.


How to use on concrete/cement:
1. Apply directly to the area to be cleaned with a brush or pump-up spray. The cement SURFACE MUST be thoroughly saturated.
2. Let the liquid remain on the cement until the matrix becomes soft to the touch. The minimum recommended time is 20 minutes, but the treated cement can be left to react overnight. RUST BUSTER will continue to attack the cement matrix even after the foaming action has subsided.
3. After the concrete has softened, apply an additional application and let it sit for about 10 minutes.
4. Clean the cement with a scraper. If cement is still present, reapplication may be necessary. The final application can be cleaned with power washing.



AVAILABLE PACKAGING:
300ml / 500ml / 1l / 5l / 20l 

KEMENKES RI PKD : 20310022739

BULK ORDER/B2B (CORPORATE) PURCHASES SERVED