Marble & Granite Polish Powder 300Gr - Marble Granite Polisher & Shiner

 Marble, terrazzo, and granite polishing and shining powder

APPLICATION: Marble, including hard marble (green marble, black marble), granite, terrazzo, limestone, etc.

COVERAGE AREA: 300 gr for 12 - 16 m2 (depending on the degree of surface wear).

SPECIAL FEATURES: 

✅ Much finer powder particles

✅ Non-corrosive to marble and skin, unlike the yellow type which, if left too long on marble or granite surfaces, can damage the marble layer and cause skin corrosion

✅ Mixes evenly to form a cohesive cream when mixed with water, unlike other products that, if left for a moment, separate into water and powder again.

✅ Smooth surface and safer to use, especially if the user cleans for too long or leaves powder residue.

✅ Does not contain/is not acidic at all

HOW TO USE: Clean the surface of dust, stains, oil, grease, seals & wax by dissolving 1:5-10 concentrate of PRIME FLOOR (Marble & Granite Cleaner) in warm water.

HOW TO POLISH: 

1. Mix the POWDER with water in a bucket & stir into a PASTE or the POWDER can be spread directly manually, then wet with water & stir until it becomes a PASTE

2. Start rubbing gently (MACHINE: low RPM / MANUAL: cotton cloth), with side-to-side movements until the surface is dry & shiny

3. Check the results. Repeat 1 - 2 if necessary, until the desired polish is achieved

4. Move the remaining PASTE with a squeegee & add POWDER then repeat the process No. 1 - 3 for other parts, until all surfaces achieve the desired shine

5. Clean the surface & grout joints with clean water. If the surface is difficult to clean, dissolve 1:10-20 PRIME FLOOR then clean

6. Wipe dry with a clean and dry pad

⚠️ The product is in POWDER form, CAN BE SHIPPED throughout INDONESIA

Available in TUBE form, a ready-to-use CREAM type that does not need to be mixed with water, for both manual and machine polishing applications.

AVAILABLE PACKAGING: 

300gr / 1kg 

KEMENKES RI PKD 

📌 SERVES BULK ORDERS/B2B (COMPANIES)